Rail Technician Craigentinny

Here at TXM we have a requirement for a team of Electrical technicians working in Craigentinny train depot in Scotland. A new opportunity has opened for several Electrical and Mechanical Technicians for one of the largest Global train Manufacturers.  We are looking for individuals from a rolling stock, REME and Aircraft (Avionics) background who hold advanced experience within the field of Mechanical or Electrical and Electronics. Location: Edinburgh, Craigentinny Train Depot. Contract: 6 months. Pay: £27.19 hourly (Inside ir35) Would need to go Umbrella or PAYE. Hours: 40 - 50 hours. (Overtime is paid at the higher rate of £37.78) Qualification: Level 3 minimum Start: ASAP  Electrical duties may include the following: • Underframe/IP connector checks – checking the wires are connected correctly • Door interlock switch protection plates (protects it being damaged) • Header panel pin change – not the correct pins put in • Wi-Fi change out – includes fitting and drilling antennas, aerials, data cables and the Wi-Fi hub • Carrying out work recording via both paperwork and computer (SAP) • Fitting and re-fitting electrical components • Uploading and downloading software data • Electrical pinning and de-pinning • Detailed electrical wiring • Crimping • Follow schematics • Basic fault finding and fluke meter tests • Implementation of modifications IAW Mod instructions • Checking of defect reporting systems designed to advise known safety defects or restrictions applicable to the movement of the Train. • Checking the presence of external equipment and systems connected to the vehicle, or in the path of the vehicle. • Removing, replacing and fault finding of Rolling Stock components • Checking the safe condition of passenger and train crew accommodation, for example lighting, heating etc. • Door systems checks • Checking Oil levels / Oil Change • Checking Water levels • Using a Laptop to run a diagnostics check • Carry out basic Heating & Ventilation modifications • Carry out basic seating modifications / Grab rail modifications • Checking Driver seats / Wiper motors/ Couplers/ Actuators • Working from detailed schematic drawings • Test Continuity using Fluke / Multi-Meter • Exhaust modification (to reduce emissions) If you are interested please respond with an up to date cv or contact Kenny McEvoy from TXM Recruit